How to Tackle Common Jewelry Problems
Jewelry can be one of the most difficult items to take care of. It’s easy to damage and often requires a lot of special care. In this blog post, we will discuss some of the most common jewelry problems and how best to tackle them. Whether your necklace has become tangled or your ring has lost its shine, we have you covered!
1. Broken Prongs:
One of the most common jewelry problems is broken prongs. Prongs are small metal pieces that hold a stone in place on a ring, necklace, or bracelet. They can break for many reasons, including everyday wear and tear, catching on clothing, or being hit against a hard surface.
If you have a piece of jewelry with broken prongs, it’s important to take it to a jeweler as soon as possible to repair it. If you leave it un-repaired, the stone could fall out and be lost or damaged. Repairing broken prongs is usually a relatively simple and inexpensive process. The jeweler will replace the broken prongs with new ones that match the original design of the piece.
2. Getting a ring stuck:
There’s nothing more frustrating than having a ring stuck on your finger. If you find yourself in this predicament, don’t panic. There are a few things you can do to try and get the ring off. First, try using soap. Wet your finger and the inside of the ring with soap. This will create some lubrication and may help the ring slide off. If that doesn’t work, try using WD-40 or another type of lubricant.
Spray a small amount onto your finger and the inside of the ring and see if that does the trick. If all else fails, you may need to visit a jeweler to have the ring cut off. This is usually a last resort, but it may be necessary if you can’t get the ring off any other way.
3. Ring bands wearing down:
Wedding rings often wear down due to the time they are worn. The best way to avoid this is to have the ring cut down to a smaller size so it can be worn on a different finger. There are also special coatings that can be applied to the ring, which will make it more durable.
Another common problem is when the setting of a stone becomes loose. This can happen over time as the metal wears down. It is important to get this fixed as soon as possible, so the stone does not fall out and become lost. A good jeweler will be able to tighten the setting and make sure it is secure.
The first thing you’ll want to do is take a close look at the band and see if there are any visible signs of wear and tear. If there are, then it’s likely that the problem will only get worse over time. The best way to fix this problem is to have the ring resized or replaced by a professional jeweler. Another option is to try and find a ring guard or wrap that can help protect the band from further damage. This may not be the most aesthetically pleasing solution, but it can be a good way to extend the life of your ring. Lastly, if you’re not happy with the look of your worn-down ring band, you can always have it replaced with new metal. This will give it a fresh, new look and help to protect the band from further wear and tear.
4. Tarnished jewelry:
Tarnish is a thin layer of corrosion that forms over metals. The most common cause of tarnish is exposure to oxygen and moisture in the air. Tarnish on jewelry can be removed using a polishing cloth or jewelry cleaner. If the tarnish is stubborn, you can use a toothbrush or cotton swab dipped in jewelry cleaner to gently scrub the affected areas.
When cleaning tarnished jewelry, first, look at the type of metal. Silver is more prone to tarnishing than gold, so you’ll need to be more careful when cleaning it. Second, use a jewelry cleaner specifically designed for the type of metal you’re cleaning. Using the wrong cleaner can damage the jewelry or leave behind streaks and residue. Finally, always rinse the jewelry off with clean water after using any cleaners or polishes. This will help remove any leftover residue and prevent further tarnishing in the future.
5. Fading gemstones:
Over time, some gemstones may begin to lose their color or become dull. This is usually due to exposure to sunlight or other sources of light. If you notice your stones looking less vibrant, you can try cleaning them with a soft cloth or jewelry cleaner. You can also store them in a dark place when you’re not wearing them to help prevent fading.
6. Discolored skin:
Sometimes, the metal in jewelry can cause the skin around it to become discolored. This is more likely to happen with cheaper metals like nickel or silver. If this happens, you can try using mild soap and water to clean the affected areas. If the problem persists, you may need to switch to a different type of jewelry less likely to cause skin irritation.
The best way to avoid common jewelry problems is to take care of your jewelry and have it professionally cleaned and serviced when necessary. Following these simple tips, you can keep your jewelry looking its best for many years. Additionally, we also recommend cleaning your jewelries at home to help maintain its shine and color.